Double decker ic reballing full process
- first remove the ic sheild
- And now cut the IC side glue ( Use SMD rework Station ) Quick 857DW+ TEMP:265 Air:2
- remove ic ( apply use first paste TEMP:350-60 Air:2)
- after ic remove( Clening ic and mother board)
- reball RAM and CPU
- install Cpu
- after install CPU now install ram
Today we will know here how to install double decker ic of mobile phone
First we will know what tools we need to do this. I have discussed below what tools we need for this work
The tools I have seen here are well within the medium price range, Better quality tools are available for this, but they also cost more
Required Tools and material List with image
SMD Rework Station Quick 857DW+
In this work we used Quick 857DW+ SMD Hot Air Gun Mechine, This machine is very good in moderate price range, But if your budget is high then you can use in Quick 861dw It is very good for such work.
Soldering iron Station
For this work we used moderately priced Sugon T-26 soldering iron station here. If you are on a low budget, you can go with OSS T-210 Iron Because it is also a very good solder iron station at low cost. And if you have more budget then you can go for high quality premium soldering iron.
CPU Glue Cutting Blade
007
CPU Opener Blade
Stencil for ic reball
This tool is used to make the ball in the right place in the ic, best stencil company in under low budget, Quinly Amaoe
PCB Cleaning brush
Brush are generally needed for cleaning our PCBs and cleaning ICs, In this case you would use the Sunshine SS-022B brush and you can use even better and more expensive brushes.
Soldering wick
It is usually used to remove solder from PCB or to clean IC’s solder. another name for this is desoldering wick. i mostly use 2.5 to 3.0 soldering wick for this type of work , In this case the possibility of pcb and ic damage is less.
Solder paste
Soldering paste is commonly used for soldering and another function is to make BGA ic ball. We usually use 183°C ppd paste for IC reballing. Here I am mentioning the name of some good company paste : mechanic, relife
Flux paste
Removing and installing components using it makes the job easier and better. this is flux paste, I am mentioning here the names of some moderately priced good flux paste.
ALL IN ONE FLUX Paste: Mechanic UV559, AD559, 223
Relife RL-420, RL-421, RL-429
KINGBO RMA-218
PCB Cleaning Water
Its main function is to clean the motherboard. It is also required to clear the IC’s glue. MCN 850 is very good at cleaning motherboard and Mechanic QC20 double decker is very good at cleaning IC glue.